tap hole मीनिंग इन हिंदी

उदाहरण वाक्य

1. I recognise the anatomy from removing them from water tanks through the bottom 25mm tap hole.
2. When enough metal is drawn off the " tap hole " is plugged with a refractory plug made of clay.
3. Either finger tips or finger pads are used by " bansuri " players to partially or fully cover the tap holes.
4. The products are removed from the furnace through one or more " tap holes " in a process called " tapping ".
5. This key is achieved by variations in length, inner diameter of the instrument, the relative size and placement of the tap holes.
6. A tap hole near the edge of the top, and a spile hole on the side used for conditioning the unfiltered and unpasteurised beer.
7. It mainly produces basic, dolomite, high alumina, monolithics, silica, flow control products and tap hole clay refractories having a consolidated installed capacity of 3, 04, 760 TPA ( FY'10 ).
8. A slag hole, located higher up on the cylinder of the furnace, and usually to the rear or side of the tap hole, is opened to let the slag flow out.
9. When the metal level is sufficiently high, the cupola tender opens the " tap hole " to let the metal flow into a ladle or other container to hold the molten metal.
10. When enough smelted ferrochrome has accumulated in the hearth of the furnace, the tap hole is drilled open and a stream of molten metal and slag rushes down a trough into a chill or ladle.